This is an 18 W EU power supply for Teltonika routers. It plugs into any European wall socket, delivers a steady 12 V at up to 1.5 A and the 4-pin plug clicks straight into the router.
With 18 W available it powers every model in the list below, from small RUT and TRB models to the RUTX, RUTM and RUTC series and the 5G routers. The RUTX50, RUTC40, RUTC42 and RUTC54 come closest to the limit at full load, so check their model pages if you plan to add a USB device. One spare covers every router you have.
Keep it as a spare, replace an adapter that has gone missing or give a second router its own supply.
Which routers it fits
It fits these Teltonika routers and gateways with the 4-pin, 3 mm pitch power socket, including the RUTX, RUTM and RUTC series and the 5G models:
- RUT: RUT200, RUT202, RUT240, RUT241, RUT260, RUT261, RUT271, RUT281, RUT901, RUT906, RUT950, RUT951, RUT955, RUT956, RUT976, RUT981, RUT986
- TRB: TRB140, TRB141, TRB142, TRB143, TRB145, TRB500
- RUTX: RUTX08, RUTX09, RUTX10, RUTX11, RUTX12, RUTX14, RUTX50, RUTXR1
- RUTM: RUTM20, RUTM30, RUTM50, RUTM51, RUTM52, RUTM54, RUTM56
- RUTC: RUTC40, RUTC41, RUTC42, RUTC50, RUTC54
- Older and other models: RUT230, RUT300, RUT360, RUT900, RUTM08, RUTM09, RUTM10, RUTM11
We checked every model above against Teltonika’s own wiki pages for the power socket and power draw. Our Teltonika router power guide has a page per model with the input range, pinout and end of life status. A few Teltonika devices use a different socket or pinout and do not fit, for example the RUT204, RUT206, RUT276, RUT286, RUTM55, TRB245, TRB255 and RUT850. If your model is not listed, ask us before you order.
The models in the list accept 12 V within their input range, so the 12 V output suits them all. A router only draws the power it needs, so the smaller models run just as well on 18 W.
Specifications
| Input | 100-240 V AC, 50/60 Hz, 0.6 A |
|---|---|
| Output | 12 V DC, 1.5 A (18 W) |
| Wall plug | EU two-pin |
| Router connector | 4-pin, 3 mm pitch |
| Cable length | 1.2 m |
| Protection | Short-circuit protection and input fuse |
Frequently asked questions
Is it powerful enough for the RUTX50 and other 5G routers?
Yes. Teltonika measured the RUTX50 at about 16.2 W on 12 V with every function at full load, which is below the 18 W this supply delivers. In normal use it draws much less. Avoid adding a power-hungry USB device on top.
Can I use it with an older RUT240 or TRB140?
Yes. Those routers accept 9 to 30 V, so 12 V suits them well. They only draw the power they need, so the extra capacity does no harm.
Can I use it outside the EU?
It accepts 100 to 240 V, so it works in most countries. It has a two-pin EU plug, so in the UK or Switzerland you need a plug adapter.
Can it stay plugged in all the time?
Yes. It is made for continuous use and has short-circuit protection.
Reviews
There are no reviews yet.