Home / Teltonika power cables / Teltonika router power guide

Teltonika · power guide

Teltonika router power supply by model

We checked 43 Teltonika routers and gateways against Teltonika's own wiki. All of them use the same 4-pin power socket, so the three cables below fit every model on this page. Find yours to see its voltage range, real power draw, pinout and end of life status.

43 models checked
4-pin socket
12 V and 24 V
Ships from the EU

We sell the cable, not the router. Smart Power Cable makes power cables and a 230 V supply for Teltonika devices. We do not sell the routers, and we are not affiliated with Teltonika.

230 V power supply

12 V, 1.5 A from any EU wall socket. Fits every model on this page.

€13.95 incl. VATBuy now

12/24 V car cable

For 12 V and 24 V vehicles. Fused plug with a power LED.

€12.95 incl. VATBuy now

Screw terminal cable

Bare ends for cabinets, batteries and solar, with the two I/O wires.

€11.95 incl. VATBuy now

RUT2 series RUT9 series TRB gateways RUTX series RUTM series RUTC series Models we do not fit

Teltonika RUT2 series

Small 4G routers for a desk, a kiosk or a camera mast. Most run on a few watts, so any of our three cables has plenty in reserve.

Model	Input	Peak at 12 V	Status	Notes
Teltonika RUT200	9 to 30 V	3.8 W	In production	All three fit
Teltonika RUT202	9 to 30 V	3.2 W	In production	All three fit
Teltonika RUT240	9 to 30 V	4.2 W	End of life, replaced by RUT200	All three fit
Teltonika RUT241	9 to 30 V	3.3 W	In production	All three fit
Teltonika RUT260	9 to 30 V	2.9 W	In production	All three fit
Teltonika RUT261	9 to 30 V	2.7 W	In production	All three fit
Teltonika RUT271	9 to 30 V	4.2 W	In production	All three fit
Teltonika RUT281	9 to 30 V	4 W	In production	All three fit

Teltonika RUT9 series

The larger four-port routers. The 2023 models RUT950 and RUT955 have been replaced by the RUT901 and RUT906, and the socket stayed the same.

Model	Input	Peak at 12 V	Status	Notes
Teltonika RUT901	9 to 30 V	3.1 W	In production	All three fit
Teltonika RUT906	9 to 30 V	9 W	In production	All three fit
Teltonika RUT950	9 to 30 V	5.5 W	End of life, replaced by RUT901	All three fit
Teltonika RUT951	9 to 30 V	4.2 W	In production	All three fit
Teltonika RUT955	9 to 30 V	9.2 W	End of life, replaced by RUT906	All three fit
Teltonika RUT956	9 to 30 V	10.3 W	In production	All three fit
Teltonika RUT976	9 to 30 V	9.1 W	In production	All three fit
Teltonika RUT981	9 to 30 V	4.9 W	In production	All three fit
Teltonika RUT986	9 to 30 V	10.2 W	In production	All three fit

Teltonika TRB gateways

Gateways for DIN rail and machine cabinets. The TRB143 is the odd one out: it needs at least 12 V, so check your supply voltage.

Model	Input	Peak at 12 V	Status	Notes
Teltonika TRB140	9 to 30 V	3.9 W	In production	All three fit
Teltonika TRB141	9 to 30 V	6.5 W	In production	All three fit
Teltonika TRB142	9 to 30 V	3 W	In production	All three fit
Teltonika TRB143	12 to 30 V	5.3 W	In production	Needs 12 V or more
Teltonika TRB145	9 to 30 V	3.4 W	In production	All three fit
Teltonika TRB500	9 to 30 V	3.7 W	End of life, replaced by TRB501	All three fit

Teltonika RUTX series

Gigabit and 5G routers in an aluminium case, rated 9 to 50 V. Teltonika has announced end of life for the whole series, with support until 3 August 2032.

Model	Input	Peak at 12 V	Status	Notes
Teltonika RUTX08	9 to 50 V	2.5 W	EOL announced, replaced by RUTM08	All three fit
Teltonika RUTX09	9 to 50 V	6 W	EOL announced, replaced by RUTM09	All three fit
Teltonika RUTX10	9 to 50 V	8 W	EOL announced, replaced by RUTM10	All three fit
Teltonika RUTX11	9 to 50 V	10 W	EOL announced, replaced by RUTM11	All three fit
Teltonika RUTX12	9 to 50 V	11.7 W	EOL announced, replaced by RUTC42	All three fit
Teltonika RUTX14	9 to 50 V	11 W	EOL announced, replaced by RUTM50	All three fit
Teltonika RUTX50	9 to 50 V	16.2 W	EOL announced, replaced by RUTM50	All three fit
Teltonika RUTXR1	9 to 50 V	11.1 W	EOL announced	All three fit

Teltonika RUTM series

The RUTX successors, also rated 9 to 50 V. The RUTM20 has no I/O on its power socket, so pins 3 and 4 do nothing there.

Model	Input	Peak at 12 V	Status	Notes
Teltonika RUTM20	9 to 50 V	6.3 W	In production	No I/O on pins 3 and 4
Teltonika RUTM30	9 to 50 V	9 W	In production	All three fit
Teltonika RUTM50	9 to 50 V	9.1 W	In production	All three fit
Teltonika RUTM51	9 to 50 V	9 W	In production	All three fit
Teltonika RUTM52	9 to 50 V	10.7 W	In production	All three fit
Teltonika RUTM54	9 to 50 V	11.6 W	In production	All three fit
Teltonika RUTM56	9 to 50 V	9.2 W	In production	All three fit

Teltonika RUTC series

Newer edge routers with higher peak draw. The RUTC40, RUTC42 and RUTC54 come close to the 18 W limit of our 230 V supply at full load.

Model	Input	Peak at 12 V	Status	Notes
Teltonika RUTC40	9 to 50 V	16.2 W	In production	Close to 18 W at full load
Teltonika RUTC41	9 to 50 V	13.4 W	In production	All three fit
Teltonika RUTC42	9 to 50 V	16.8 W	In production	Close to 18 W at full load
Teltonika RUTC50	9 to 50 V	16.2 W	In production	Close to 18 W at full load
Teltonika RUTC54	9 to 50 V	17.6 W	In production	Close to 18 W at full load

By input voltage

9 to 30 V DC: RUT200, RUT202, RUT240, RUT241, RUT260, RUT261, RUT271, RUT281, RUT901, RUT906, RUT950, RUT951, RUT955, RUT956, RUT976, RUT981, RUT986, TRB140, TRB141, TRB142, TRB145, TRB500.
9 to 50 V DC: RUTX08, RUTX09, RUTX10, RUTX11, RUTX12, RUTX14, RUTX50, RUTXR1, RUTM20, RUTM30, RUTM50, RUTM51, RUTM52, RUTM54, RUTM56, RUTC40, RUTC41, RUTC42, RUTC50, RUTC54.
12 to 30 V DC: TRB143. Teltonika ships it with a 12 V adapter. Our 230 V supply gives 12 V, but a 9 V source will not start it.

On 24 V trucks and buses, the 9 to 50 V models have the most margin against start-up spikes. For 9 to 30 V models in heavy vehicles, add surge protection.

Close to the 18 W limit

Teltonika's full-load figures at 12 V are highest for the RUTC54 (17.6 W), RUTC42 (16.8 W), RUTC50 (16.2 W), RUTX50 (16.2 W), RUTC40 (16.2 W). They stay under 18 W, so our 230 V supply works, but with little room left. If one of these runs at constant full load with USB devices attached, a stronger DC source through the screw terminal cable is the safer choice.

End of life and replacements

Model	Orders ended or end	Support until	Replacement
RUT240, RUT950, RUT955	31 July 2023	31 July 2028	RUT200 (RUT241 closest match), RUT901, RUT906
TRB500	3 May 2026	3 January 2031	TRB501
RUTX08, RUTX09, RUTX10, RUTX11, RUTX12, RUTX14, RUTX50, RUTXR1	3 February 2027	3 August 2032	RUTM08, RUTM09, RUTM10, RUTM11, RUTC42, RUTM50. No replacement for the RUTXR1.

The replacement models keep the 4-pin socket, so our cables move with you when you upgrade.

Teltonika models our cables do not fit

Models our cables do not fit

These Teltonika devices use a different power connector, so our 4-pin cables will not plug in. Use the adapter Teltonika supplies, or a cable made for that connector.

Model	Power connector
Teltonika RUT204, RUT206, RUT276, RUT286	2-pin power socket
Teltonika RUTM55	3-pin power socket
Teltonika TRB245, TRB255	Power on 2 pins of a 16-pin terminal block

Teltonika power FAQ

?Do your cables fit every Teltonika router?

No. They fit models with Teltonika's 4-pin power socket, which covers the 43 models on this page. The RUT204, RUT206, RUT276, RUT286, RUTM55, TRB245 and TRB255 use other connectors.

?Is the 230 V supply strong enough for any Teltonika router?

For every model listed here, yes. It gives 12 V at 1.5 A (18 W). The most demanding models, such as the RUTC54 at about 17.6 W peak, come close to that limit at full load.

?Can I run a Teltonika router on 24 V?

Yes, every model on this page accepts 24 V. Use the car cable in a vehicle or the screw terminal cable for a 24 V system in a cabinet.

?Which Teltonika routers have I/O on the power socket?

Most of them have a digital input and output, or a configurable pair, on pins 3 and 4. Our screw terminal cable brings them out on green and white wires. The RUTM20 has no I/O there.

?Do you sell Teltonika routers?

No. Smart Power Cable makes the power cables and the 230 V supply. The routers are sold by Teltonika and its distributors.

?My router is end of life. Will the cables fit its replacement?

Yes. The replacements Teltonika names for the RUT240, RUT950, RUT955, TRB500 and the RUTX series keep the same 4-pin socket.